Split System Installation — Noosa, Hinterland & Sunshine Coast
Split system installation done properly — right sizing, clean pipework, no shortcuts. Servicing Noosa, Cooroy, Pomona, Tewantin and Gympie.
Split systems are the most versatile and cost-effective way to cool and heat rooms in Queensland — but the quality of the outcome depends almost entirely on the quality of the installation. A well-sized, properly installed split system is quiet, efficient and lasts 15 years. A poorly installed one short-cycles, drips condensate inside, sounds like a truck, and dies in 5. Ultralec installs split systems across Noosa Heads, Noosaville, Tewantin, Cooroy, Pomona, Eumundi, Gympie and the Sunshine Coast.
Single-Head Split Systems
Single-head systems cool or heat a single room or open-plan area from one indoor unit connected to one outdoor compressor. They're simple, cost-effective, easy to service, and appropriate for most residential applications — bedrooms, living rooms, home offices. Sizing matters: 2.5–3.5kW for bedrooms, 4–5kW for medium living areas, 6–8kW for large open-plan spaces.
Multi-Head Split Systems
One outdoor compressor, multiple indoor heads — cooling several rooms simultaneously without multiple outdoor units cluttering the exterior of the home. Multi-head systems are popular in Noosa's prestige market where rooflines and aesthetics matter. They cost more upfront but deliver better aesthetics and often better energy performance than multiple single-head systems.
What a Proper Installation Looks Like
- Correct sizing assessment — room volume, insulation, orientation, window area
- Optimal indoor unit placement — airflow coverage, away from direct sun, accessible for service
- Neat pipework — lagged, straight runs in proper casing or through wall cavities where possible
- Correct outdoor unit placement — adequate clearance, shade where possible, away from bedrooms
- Dedicated circuit — sized correctly for the unit, properly protected
- Vacuum and pressure test — before charging with refrigerant
- Commissioning — measured performance verification, not just "it's running"
Brands We Install
We install all major brands — Daikin, Fujitsu, Mitsubishi Electric, Panasonic, LG, Samsung, Gree and others. If you haven't purchased a unit yet, we'll recommend the right brand, series and size for your application and budget. We're not brand-aligned — we recommend what's actually right for your situation.
Switchboard Assessment
Every split system installation includes a switchboard assessment. Adding a 2.5–8kW appliance to an older switchboard that's already at capacity can overload circuits or trip breakers. We identify this upfront and include any required circuit work in the quote — not as an add-on surprise after the unit is on the wall.
Split System Coverage
We install split systems across Noosa Heads, Noosaville, Tewantin, Sunshine Beach, Peregian Springs, Cooroy, Pomona, Eumundi, Yandina and Gympie. Quote turnaround is typically within 24–48 hours.
Frequently Asked Questions
As a rough guide: 2.5–3.5kW for bedrooms, 4–5kW for medium living areas, 6–8kW for large open-plan spaces. Actual sizing depends on ceiling height, insulation, orientation and window area. We assess and recommend before quoting.
A single-head split system installation typically takes 3–5 hours. Multi-head systems take longer depending on the number of indoor units and cable run complexity.
We install all major brands including Daikin, Fujitsu, Mitsubishi Electric, Panasonic, LG, Samsung and Gree. We're not tied to any particular brand and will recommend what suits your application.
In most cases yes — a dedicated circuit sized for the unit is the correct installation. We include circuit work in our quotes, and check your switchboard capacity as part of every installation.